가공에 사용되는 초경 판의 일반적인 치수와 공차는 얼마입니까?
일반적인 치수:
- 두께: 카바이드 플레이트의 두께는 몇 밀리미터에서 수 센티미터까지 다양합니다. 일반적인 두께에는 1mm, 2mm, 3mm, 5mm, 10mm 및 중장비 응용 프로그램의 경우 최대 50mm 이상이 포함됩니다.
- 너비와 길이: 초경 플레이트의 너비와 길이도 매우 다양합니다. 표준 크기에는 다음이 포함될 수 있습니다.
- 50mm x 50mm
- 100mm x 100mm
- 150mm x 150mm
- 200mm x 200mm
- 특정 요구 사항을 충족하기 위해 사용자 정의 크기를 사용할 수 있는 경우가 많습니다.
초경 플레이트의 공차는 정밀한 기계 가공 및 피팅을 보장하는 데 매우 중요합니다. 공차는 제조 공정과 플레이트의 의도된 용도에 따라 달라질 수 있습니다.
- 두께 Tolerance: This can be very tight, often within ±0.1mm or better. For precision applications, tolerances might be as tight as ±0.05mm.
- 너비와 길이 Tolerance: Standard tolerances for width and length can be around ±0.1mm to ±0.5mm, depending on the size of the plate and the precision required.
- 평탄도 공차: The flatness of carbide plates is critical for many applications. Flatness tolerances can be specified to within a few micrometers (µm). Typical flatness tolerances might be:
- For small plates: within 0.005mm (5µm)
- For larger plates: within 0.01mm to 0.02mm (10µm to 20µm)
- 표면 마감: The surface finish of carbide plates can vary depending on the application. A common surface finish specification might be Ra 0.4µm or better, ensuring a smooth and precise surface for cutting or machining.
많은 공급업체가 특정 고객 요구 사항을 충족하기 위해 맞춤형 초경 플레이트를 제공합니다. 여기에는 고유한 치수, 특수 공차 또는 특정 응용 분야에 맞는 특정 등급의 초경이 포함될 수 있습니다.
관련 검색 키워드:
카바이드 플레이트, 텅스텐 카바이드 플레이트 공급 업체, 플레이트 카바이드 커터, 카바이드 세라믹 플레이트, 초경합금 플레이트, 텅스텐 카바이드 플레이트, 솔리드 초경 플레이트,텅스텐 카바이드 플레이트